Furniture Pickup and Transportation Checklist
The official FurnitureKaro Editorial Team is dedicated to providing accurate, factual, and practical guides on buying, selling, and managing furniture in Pakistan.
To transport used furniture safely in Pakistan, confirm the item’s dimensions, hire a suitable local loader vehicle like a Suzuki pickup or Shehzoor truck, gather moving blankets and tie-down ropes, carefully dismantle detachable components, protect fragile wood surfaces and fabric upholstery, and secure the load to prevent shifting during transit.
Vehicle Sizing: Suzuki Pickup vs Shehzoor Truck
Selecting the correct commercial loader vehicle is the most critical cost and safety decision when moving pre-owned furniture in cities like Karachi, Lahore, and Rawalpindi. Renting a vehicle that is too small forces multiple trips or causes hazardous overhangs, while renting an unnecessarily large truck increases your transport expense in PKR.
| Vehicle Type | Cargo Bed Dimensions (L x W) | Recommended Furniture Load | Typical City Application |
|---|---|---|---|
| Suzuki Pickup Loader | 6.5 ft x 4.2 ft | Single 3-seater sofa, dining table, single bed, office desk, washing machine | Short intra-city moves, narrow streets, low bridge clearances |
| Hyundai / Shehzoor Truck | 10 ft x 5.5 ft | Complete king size bedroom set, L-shaped 6-seater sofa, 3-door wardrobe | Full home moves, multi-item pickups, long-distance inter-city transport |
| Flatbed Shahzore / Mazda | 14 ft x 6.5 ft | Multiple bedroom sets, showroom liquidations, commercial office furniture | Bulk commercial moves, showroom delivery, heavy solid Sheesham storage |
Logistics Phase 1: Before Confirming the Purchase
Before finalizing your deal with the seller, confirm the pickup details. Ask which floor the item is located on and if a lift is available. If you have to carry a heavy Sheesham wardrobe down three flights of stairs, you will need extra helpers and the seller's cooperation. Verify the parking situation for loading vehicles outside the seller's house. Measure staircase landings and elevator door clearance to avoid getting large items stuck.
Logistics Phase 2: Packing Materials and Equipment
Before heading to the pickup location, gather essential packing supplies. Prepare tie-down ropes (nylon or braided cotton), corrugated cardboard sheets, plastic stretch wrap, and moving blankets or old cotton quilts. Protect polished wood corners with folded cardboard buffers to prevent chips during corner turns and bumpy road transport.
Logistics Phase 3: Loading and Securing the Furniture
Dismantle any detachable parts before loading. Remove table legs, bed side-rails, wardrobe drawers, and glass shelves. Wrap these parts separately. Secure open wardrobe doors and drawers with plastic stretch wrap or masking tape to prevent them from swinging open during transport. Place heavy wooden pieces at the bottom of the loader bed and secure the load tightly with ropes tied to the vehicle frame to prevent sliding on rough roads.
Logistics Phase 4: Transport and Unloading
Drive carefully, especially when crossing speed bumps, potholes, or sharp turns. Upon arrival at your destination, inspect the unloading path before carrying the items inside. Reassemble the furniture carefully, ensuring all screws, dowels, and brackets are tightened securely, and verify that drawers and cabinet doors align smoothly.
Moving Checklist by Furniture Type
- [ ] Sofa: Wrapped armrests and cushions in plastic stretch wrap
- [ ] Bed: Disassembled frame, collected support slats, bagged all screws and bolts
- [ ] Wardrobe: Taped doors shut, removed glass shelves, drawers, and hanging rods
- [ ] Table: Detached legs, protected glass tops with thick cardboard corner buffers
- [ ] Office Chair: Secured hydraulic lever, wrapped mesh backrest in protective cloth
